Docker Swarm*

This sample deployment demonstrates the use of Docker* in swarm mode. The following conditions apply:

All images are built and tested with docker-compose. To learn more about building the images with docker-compose, refer to Express Setup.
Push images to the registry to make them available for deployment on other systems.
Run the commands below from the open-amt-cloud-toolkit install directory.

Important

Not for production use.

Get the Toolkit¶

Open a Terminal or Command Prompt and navigate to a directory of your choice for development:

git clone --recursive https://github.com/open-amt-cloud-toolkit/open-amt-cloud-toolkit --branch v2.6.1

Change to the cloned open-amt-cloud-toolkit directory.
```
cd open-amt-cloud-toolkit
```

Deploy the stack to the swarm¶

Important - For Linux

Before running the following commands on Linux, confirm that the user has been added to the docker group. For instructions, refer to Add docker group. Otherwise, prefix each command with sudo.

Initialize a swarm.
```
docker swarm init
```

Copy docker compose config to temporary swarm.yml file.

docker-compose -f .\docker-compose.yml config > swarm.yml

Set the network driver to overlay in the swarm.yml file.
LinuxWindows
sed -i "s|driver: bridge|driver: overlay|g" swarm.yml
(Get-Content -Path './swarm.yml') -replace 'driver: bridge', 'driver: overlay' | Set-Content -Path './swarm.yml'
Important

Open the swarm.yml file to check that driver: bridge was replaced with driver: overlay. If the result is incorrect or corrupted, delete the swarm.yml file, rerun Step 2, and manually replace the string.
If you've run docker-compose previously, as in the instructions in Express Setup, run docker-compose down to stop the open-amt-cloud-toolkit services:
```
docker-compose down -v
```

Create the stack.

docker stack deploy -c swarm.yml scalingdemo

Check all of the services are running.

docker stack services scalingdemo

Success

The table below is an example of a services list:

ID	NAME	MODE	REPLICAS	IMAGE	PORTS
6dye78yg66zp	scalingdemo_db	replicated	1/1	postgres:latest	*:5432->5432/tcp
nahbub6fxrvu	scalingdemo_kong	replicated	1/1	kong:2.3	:443->8443/tcp, :8001->8001/tcp
nltp54asb8kz	scalingdemo_mps	replicated	1/1	mps:latest	*:4433->4433/tcp
uc9jsf5554cv	scalingdemo_mpsrouter	replicated	1/1	mpsrouter:latest
ojtcs8qjxct3	scalingdemo_rps	replicated	1/1	rps:latest
wbk4of70do63	scalingdemo_vault	replicated	1/1	vault:latest	*:8200->8200/tcp
pc143h8ml4ua	scalingdemo_webui	replicated	1/1	webui:latest

Scale the mps service.

docker service scale scalingdemo_mps=2

Success

The table below is an example of a services list after scaling the mps:

ID	NAME	MODE	REPLICAS	IMAGE	PORTS
6dye78yg66zp	scalingdemo_db	replicated	1/1	postgres:latest	*:5432->5432/tcp
nahbub6fxrvu	scalingdemo_kong	replicated	1/1	kong:2.3	:443->8443/tcp, :8001->8001/tcp
nltp54asb8kz	scalingdemo_mps	replicated	2/2	mps:latest	*:4433->4433/tcp
uc9jsf5554cv	scalingdemo_mpsrouter	replicated	1/1	mpsrouter:latest
ojtcs8qjxct3	scalingdemo_rps	replicated	1/1	rps:latest
wbk4of70do63	scalingdemo_vault	replicated	1/1	vault:latest	*:8200->8200/tcp
pc143h8ml4ua	scalingdemo_webui	replicated	1/1	webui:latest

Remove the stack:
```
docker stack rm scalingdemo
```