Skip to content

Build & Run RPC

Developed in Go* programming language, the Remote Provisioning Client (RPC) application runs on the managed device and communicates with the Remote Provisioning Server (RPS) microservice on the development system. The RPC and RPS configure and activate Intel® AMT on the managed device. Once properly configured, the remote managed device can call home to the Management Presence Server (MPS) by establishing a Client Initiated Remote Access (CIRA) connection with the MPS. See Figure 1.

Beta Version Instructions Ahead

This version of the RPC application contains functional enhancements. See Release Notes.

However, it is a Beta version release.

If you are unable to complete the installation below or you simply require an older release of the RPC, see Open AMT Cloud Toolkit 2.0:

Production Environment

In a production environment, RPC can be deployed with an in-band manageability agent to distribute it to the fleet of AMT devices. The in-band manageability agent can invoke RPC to run and activate the AMT devices.

Figure 1: RPC Configuration
Figure 1: RPC configuration

Figure 1 Details

The RPC on a managed device communicates with the Intel® Management Engine Interface (Intel® MEI, previously known as HECI) Driver and the Remote Provisioning Server (RPS) interfaces. The Driver uses the Intel® MEI to talk to Intel® AMT. The RPC activates Intel® AMT with an AMT profile, which is associated with a CIRA configuration (Step 3). The profile, which also distinguishes between Client Control Mode (CCM) or Admin Control Mode (ACM), and configuration were created in Create a CIRA Config or Create an AMT Profile. After running RPC with a profile, Intel® AMT will establish a CIRA connection with the MPS (Step 4) allowing MPS to manage the remote device and issue AMT commands (Step 5).

Build the RPC

To build the executable:

If you are building on a development system, copy the resulting executable to the managed device.

  1. Change to the rpc-go directory of the cloned open-amt-cloud-toolkit repository.

    cd rpc-go
    Haven't Cloned the open-amt-cloud-toolkit Repository?
    1. Clone the whole toolkit repository: 
      git clone https://github.com/open-amt-cloud-toolkit/open-amt-cloud-toolkit --branch v2.2.2 --recursive
    2. Only clone the rpc-go repository: 
      git clone https://github.com/open-amt-cloud-toolkit/rpc-go --branch v2.1.0

  2. Open a Terminal (Linux) or Powershell/Command Prompt as Administrator (Windows):

    sudo apt install build-essential

    go build -o rpc ./cmd


    go build -o rpc.exe ./cmd

    docker build -f "Dockerfile" -t rpc-go:latest .

    Note

    The image created with the Docker instruction above is only suitable for Docker on a Linux host.

    RPC Go Build Warnings

    You may see the go build command output a series of warnings similar to below. The binary still successfully built. These warnings show due to LMS, which is based on C, and it's interactions with AMT firmware. In the future, this may change.

    $ go build -o rpc ./cmd
# rpc/internal/amt
In file included from internal/amt/commands.go:14:
internal/amt/../../microlms/heci/LMEConnection.c: In function 'LME_Init':
internal/amt/../../microlms/heci/LMEConnection.c:129:24: warning: passing argument 1 of 'ILibSpawnNormalThread' from incompatible pointer type [-Wincompatible-pointer-types]
  129 |  ILibSpawnNormalThread((voidfp)(&LME_Thread), module);
  ...

  3. Copy the executable to a managed device.

  4. Confirm a successful build:

    sudo ./rpc version

    .\rpc version

    sudo docker run --device=/dev/mei0 rpc-go:latest version

Run RPC to Activate and Connect the AMT Device

The toolkit provides a reference implementation called the Sample Web UI to manage the device. After running device activation instructions below, your device will be listed on the Devices tab in the Sample Web UI.

To run the application and connect the managed device:

  1. After building the RPC, copy the executable to the managed device.

  2. On the managed device, open a Terminal (Linux) or Powershell/Command Prompt as Administrator (Windows).

  3. Navigate to the directory containing the RPC application.

  4. Running RPC with the activate command configures or provisions Intel® AMT. It will take 1-2 minutes to finish provisioning the device. In the instruction below:

    • Replace [Development-IP-Address] with the development system's IP address, where the MPS and RPS servers are running.
    • Replace [profile-name] with your created profile in the Sample Web UI. The RPC application command line parameters are case-sensitive.
    sudo ./rpc activate -u wss://[Development-IP-Address]/activate -n -profile [profilename]

    .\rpc activate -u wss://[Development-IP-Address]/activate -n -profile [profilename]

    sudo docker run --device=/dev/mei0 rpc-go:latest activate -u wss://[Development-IP-Address]/activate -n -profile [profilename]

    Note - RPC Arguments

    See more about the flag and other arguments.

    Transition Activated Device

    To learn how to use the RPC application to transition an already activated (provisioned) Intel vPro® Platform device, see Transition Activated Device.

    Success

    Example Output after Activating and Configuring a device into ACM:

    Figure 2: Example output after configuration
    Figure 2: Example output after configuration

    Troubleshooting

    Run into an issue? Try these troubleshooting steps.

Next up

Manage AMT Device

Back to top